Technical Specifications
Drill Stroke: | 0.500″ |
---|---|
Spindle Speeds: | 600 rpm 7000 rpm |
Feed Rate Range: | 0.001″ to 0.012″ IPR |
Motor hp: | 0.54 |
Air Consumption: | 18 CFM @ 90 PSI |
Collet Stroke: | 0.250″ |
Weight: | 4.75 lb. |
Standard Features
Fully adjustable feed rate. |
Foot assembly, collet, mandrel, bushings, lift fingers are all interchangeable with previous models. |
Accomodates all nutplate rivet spacings from 0.219″ to 1.125″. |
Metric spacings are available on special request. |
Option Features
C-Yoke foot attachment for edge applications. |
Booster pump to increase clamp and drill thrust for drilling in tough materials. |
Adjustable air exhaust direction. |
Coolant lubricant system for increased drill life and improved cycle time. |
Cobalt and Carbide cutters available. |
Nutplate Drillmotor Cutter Chart | ||||
---|---|---|---|---|
Part number | Shank Dia. | Drill Dia. | Drill Length | Material |
WD40-100-35 | .1875″ | #40 | .420″ | M7 |
WD40M42-100-35 | .1875″ | #40 | .420″ | M42 |
WD40C-100-35 | .1875″ | #40 | .420″ | Car. |
WD40-100-50 | .1875″ | #40 | .560″ | M7 |
WDS40M42-100-35 | .2500″ | #40 | .420″ | M42 |
WDS40C-100-35 | .2500″ | #40 | .420″ | Car. |
WDS40-100-50 | .2500″ | #40 | .560″ | M7 |
WDS40M42-100-50 | .2500″ | #40 | .560″ | M42 |
WD30-100-35 | .2500″ | #30 | .420″ | M7 |