Aircraft Tools: Innovative Tooling Services

Pulse Tools

aircraft-tools — Tue, 15 May 2012 20:38:35 +0000

Omega Torque-Controlled Shut-Off Pulse Tools

ULT-70

Close-up of tools with 1/4 hex QC chucks. This is notated by the “D” suffix at the end of the part number

Model #	Torque Range	RPM	OAL	Weight	Drive Attachment
ULT30D	22-49 in-lbs.	3800*	6.4″	1.9 lbs.	1/4″ QC hex
ULT40(D)	39-71 in-lbs.	3600*	6.4″	2 lbs.	3/8″ sq. /1/4″ hex
ULT-50(D)	62-138 in-lbs.	4400*	6.4″	2 lbs.	3/8″ sq./ 1/4″ hex
ULT60(D)	132-288 in-lbs.	6700*	6.8″	2.1 lbs.	3/8″ sq. / 1/4″ hex
ULT-70	264-396 in-lbs.	6000*	7″	2.3 lbs.	3/8″ sq. dr.

* = Under load the socket speed drops to between 150-200 rpm because
of the pulsing action of the tool.

Documents

Nutrunners

aircraft-tools — Tue, 01 May 2012 20:36:25 +0000

14RAA23AM3

UAN-611R-60C

24RAA33AX3

Model #	Torque Range	RPM	OAL	Weight	Angle Head Height	Sq. Drive
UAN-611R-60C	51-103 in-lbs.	620	15.1”	3.5 lbs.	1.9”	3/8”
UAN-611R-50C	68-180 in-lbs.	470	14.7”	3.5 lbs.	1.9”	3/8”
UAN-611R-40C	120-216 in-lbs.	400	14.7”	3.5”	1.9”	3/8”
14RAA05AM2	4-50 in-lbs.	570	12.1”	1.8 lbs.	1.06”	1/4”
14RAA11AH3	10-100 in-lbs.	340	13.5”	2.2 lbs.	1.19”	3/8”
24RAA19AM3	84-168 in-lbs.	700	15”	3.2 lbs.	1.16”	3/8”
24RAA23AM3	108-204 in-lbs.	600	15”	3.2 lbs.	1.16”	3/8”

Angle head extensions available for 24 series nutrunners in 3.5”; 7”; and 10.5”. Call for more details.

Documents

Nutrunners

Allfast Nose Assemblies

aircraft-tools — Tue, 24 Apr 2012 19:51:12 +0000

Nose Assembly	Configuration	Rivet type installed
RV832	reduced straight	NAS1398/99 “A” Code
RV812	straight	NAS1398/99 “A” Code NAS1768/69
RV872	offset	NAS1398/99 “A” Code
RV882	right angle	NAS1398/99 “A” Code
RV819	straight	M7885/NAS9300/ BACR15FR/FP
RV818	offset	M7885/NAS9300/ BACR15FR/FP
RV817	right angle	M7885/NAS9300/ BACR15FR/FP
RV911	straight	VNS1924CA/ M83454-(_)-AA/ BACS53B1EA
RV971	offset	VNS1924CA/ M83454-(_)-AA/ BACS53B1EA
RV981	right angle	VNS1924CA/ M83454-(_)-AA/ BACS53B1EA

Olympic Style Noses

“Max” Style Noses

Ground Stud Noses

Click to enlarge.

Documents

Allfast Installation Tooling

Allfast Adapters

aircraft-tools — Thu, 19 Apr 2012 20:46:06 +0000

	RVA365 Used in deep, hard to reach places. They extend the reach of RV832/812/872/882/336/355/375/380/836/855/875/880911/971/981 nose assemblies. Lengths: 2″ = RVA365-2 4″ = RVA365-4 6″ = RVA365-6
	RV704E Extend the reach of “max” style nose assemblies. Lengths: 2″ = 704002 4″ = 704004 6″ = 704006 12″ = 704012
	RVA704H-701L Permits the use of RV819/818/817 “max” style nose assemblies on the RV30GD riveter.
	RVA704 Permits the use of RV832/812/872/882/336/355/375/380/836/855/875/880/911/971/981 nose assemblies on the RV15G riveter.
	RVA84 Permits the use of RV832/812/872/882/336/355/375/380/836/855/875/880/911/971/981 nose assemblies on the RV784/G784 riveter.

Documents

Allfast Installation Tooling

Allfast Rivet Guns

aircraft-tools — Thu, 19 Apr 2012 20:15:38 +0000

Allfast RV14GD

RV14GD

Tool Specifications:

Height: 11″
Weight: 4 lbs
Pull Force: 1800 lbs.
Stroke: 1.125″

Rivet #	Rivet Dia.	Straight Nose Assy.	Offset	Right Angle
NAS1768/69	3 thru 6 (-6 Al. only)	RV812-(_)	RV872-(_)	RV882-(_)
NAS1398/99 “A” Code	3 thru 6 (-6 Al. only)	RV812-(_)	RV872-(_)	RV882-(_)
MS20600/20601	3 thru 6	RV355-(_)	RV375-(_)	RV380-(_)
MS20604/20605	3 thru 6	RV355-(_)	RV375-(_)	RV380-(_)
Nutplate; BACR15DR/ Specials CC/CF/DA	3 thru 6	RV355-(_)	RV375-(_)	RV380-(_)

Allfast RV30GD

RV30GD

Tool Specifications:

Height: 11.75″
Weight: 5.125 lbs
Pull Force: 2800 lbs.
Stroke: 1.125″

Rivet #	Rivet Dia.	Straight Nose Assy.	Offset	Right Angle	Adapter
NAS1398/99 “A” Code	3 thru 6	RV812-(_)	RV872-(_)	RV882-(_)	none
NAS1398/99 “A” Code	8	RV8812-8	RV8872-8	RV8882-8	RVA30
MS20600/ 20601	3 thru 6	RV355-(_)	RV375-(_)	RV380-(_)	none
MS20600/ 20601	8	RV3355-(_)	RV3375-(_)	RV3380-(_)	RVA30
MS20604/ 20605	3 thru 6	RV355-(_)	RV375-(_)	RV380-(_)	none
MS20604/ 20605	8	RV3355-(_)	RV3375-(_)	RV3380-(_)	RVA30
Nutplate/ BACR15DR	3 thru 4	RV355-(_)	RV375-(_)	RV380-(_)	none
M83454/ BACRS53B Ground studs	6-32/ 8-32/ 10-32	RV911-(_)	RV971-(_)	RV981-(_)	none
Same as above	1/4”-28	RV9911-1/4	RV9971-1/4	RV9981-1/4	RVA30

Allfast RV15G

RV15G

Tool Specifications:

Height: 11″
Weight: 4.25 lbs
Pull Force: 3250 lbs.
Stroke: 0.518″

* = with RVA704 Adapter

Rivet #	Rivet Dia.	Straight Nose Assy.	Offset	Right Angle	Adapter
M7885 NAS9301/9312 BACR15FR/FP	4 thru 6	RV819	RV818	RV817	none
NAS1398/99 “A” Code NAS1768/69	3 thru 6	RV812-(_)*	RV872-(_)	RV882-(_)	RVA704
MS20600/ 20601/ 20604/ 20605	3 thru 6	RV355-(_)*	RV375-(_)	RV380-(_)	RVA704
Nutplate BACR15DR	3 & 4	RV355-(_)*	RV375-(_)	RV380-(_)	RVA704
BACR15CC/CF/ DA	3 thru 6	RV355-(_)*	RV375-(_)	RV380-(_)	RVA704
M83454/ BACS53B Ground studs	6-32/ 8-32/ 10-32	RV911-(_)*	RV971-(_)	RV981-(_)	RVA704

Allfast RV50GB

RV50GB

Tool Specifications:

Height: 7″
Weight: 2 lbs
Pull Force: 600 lbs.
Stroke: 0.625″

Rivet #	Rivet Dia.	Straight Nose Assy.	Offset	Right Angle
NAS1398/99 “A” Code NAS1768/69	3 & 4 -5 Al. only	RV812-(_)	RV872-(_)	RV882-(_)
MS20600/ 20601/ 20604/ 20605	3 & 4 -5 Al. only	RV355-(_)	RV375-(_)	RV380-(_)
Nutplate BACR15DR	3 & 4	RV355-(_)	RV375-(_)	RV380-(_)

Allfast RV51GA

RV51GA

Tool Specifications:

Height: 7″
Weight: 2.5 lbs
Pull Force: 910 lbs.
Stroke: 0.625″

Rivet #	Rivet Dia.	Straight Nose Assy.	Offset	Right Angle
NAS1398/99 “A” Code NAS1768/69	3 thru 5 -6 Al. only	RV812-(_)	RV872-(_)	RV882-(_)
MS20600/ 20601/ 20604/ 20605	3 thru 5 -6 Al. only	RV355-(_)	RV375-(_)	RV380-(_)
Nutplate BACR15DR	3 & 4	RV355-(_)	RV375-(_)	RV380-(_)
BACR15CC/CF/DA	3 thru 5 -6 Al. only	RV355-(_)	RV375-(_)	RV380-(_)

Documents

Allfast Installation Tooling

Vacuum Microstop Cages

aircraft-tools — Wed, 18 Apr 2012 20:21:58 +0000

The ZT680-ITVF Microstop w/ Vacuum Footpiece

10,000 rpm– rated microstop cage with full-radial bearing support! Will not get hot when in use!
Has felt dust shield in front of radial bearings to keep composite dust out.
Fully .0005″ adjustable.
Available in three shaft styles: 1/4″ round; Quick change ball-lock; three-flat.
Hard-stop inner shoulder in steel body of footpiece—not snap rings or roll pins — once set CANNOT over countersink!
L-H thread jam nut keeps countersink depth adjustment collar tight and unmoved during vibration caused by drillmotor.
Can also be used to vacuum aluminum shavings.

Model Number	Max. RPM	Min. Incremental Adjustment	Shank Type	Internal Thd.	Max. Cutter Dia.
ZT680-ITVF	10,000	.0005″	1/4″ round	1/4″-28	.750″
ZT680-ITVF-TF	10,000	.0005″	Three flats	1/4″-28	.750″
ZT680-ITVF-QC	10,000	.0005″	Quick Change Ball Lock	1/4″-28	.750″

Documents

Vacuum Microstop Cages

Taper-Lok Microstop Cages

aircraft-tools — Wed, 18 Apr 2012 19:25:26 +0000

TLA4900-12

This microstop drill cage is for use with 1/8” & 5/32” diameter standard taper-lok drill-reamers. Tool is equipped with 1/4”-28 shaft thread and has an OAL of 5-1/4”. Black oxide finish.

TLA4900-24

This microstop drill cage is for use with 3/16” diameter standard taper-lok drill-reamers. Tool is equipped with 1/4”-28 shaft thread and has an OAL of 7-5/16”. Black oxide finish.

TLA4900-38

This microstop drill cage is for use with the larger diameter standard taper-lok drill-reamers. Tool is equipped with 7/16”-20 shaft thread and has an OAL of 10.75”. Black oxide finish.

Knockout Tools

TLA4150

The TLA4150 taper-lok removal device is available for all sizes of taper-lok fasteners from 1/8” through 1” in diameter. Tool is constructed from hardened alloy steel with chrome plated finish.

Gages
	TLG5120 & TLG5125 The TLG5120 &5125 countersink depth gages are intended for shop and tool room use in setting up drilling equipment to the proper countersink depth. Gages are available for all sizes of taper-lok fasteners from 1/8” through 1” in diameter.
	TLG5160 The TLG5160 blueing gage is used with Prussian blue pigment for checking the roundness and surface finish of taper-lok holes. Gage is manufactured for all sizes of standard taper-lok holes from hardened cadmium plated alloy steel.
	TLG5130-1; TLG5130-2; TLG5130-3 The TLG5130-1 protrusion gage is used for checking the protrusion limits of both flush and protruding head taper-lok fasteners from 3/16” to 1/2” diameter. Gage is injection molded plastic, hand finished to exacting tolerances. TLG5130-2 is for fasteners 9/16-1” diameter and TLG5130-3 is for fasteners 1/8”-7/32” diameter.

Documents

Taper-Lok Cutters

Heavy Duty Microstop Cages

aircraft-tools — Wed, 18 Apr 2012 19:11:02 +0000

ZT680-SPI-QC shown

ZT680 Series

The ZT680 has been designed for continuous operation up to 10,000 rpm in the most demanding applications. The ZT680 cage is available in a full range of footpieces shown to the right and below.

Features:

Fail-safe positive stop insures accurate repeatability and eliminates the possibility of work piece damage.
Felt dust shield eliminates composite/graphite dust contamination of the radial ball bearings extending cage life.
.0005″ incremental depth adjustment. 3/4″ diameter cutter capacity with standard “S” footpieces— 1″ capacity with wide “W” footpieces.
1/4″ shaft travel. 1/4″-28 and 6MM internally threaded shafts.

Footpiece Options for the ZT680 Microstop Cage

Click to enlarge

ZT691-SPI-TF shown.

Large Cutter Capacity Precision Cages

The ZT673 /ZT674/ZT691/ZT692 have been designed for continuous operation at 6,000 rpm. Features include:

7/16″ shaft travel with full ball bearing design.
.0005″ incremental depth adjustment.
Fail-safe positive stop insures accurate repeatability and eliminates possible work piece damage.
TF = Three flats on the 3/8″ shaft/ No Suffix = 3/8″ round shaft
ZT691/692 Series has the felt dust shield feature of the ZT680 Series.

Cage Part Number	Shaft Thread	Footpiece O.D.	Footpiece I.D.	Overall Length	Cutter Capacity
ZT673-SPI-TF	3/8″-24	1.620″	1.280″	5.07″	1.250″
ZT673-W-TF	3/8″-24	1.750″	1.531″	5.07″	1.500″
ZT673-WPH-TF	3/8″-24	2.125″	1.531″	5.07″	1.500″
ZT673-WWPH-TF	3/8″-24	2.500″	2.010″	5.07″	2.000″
ZT674-SPI-TF	7/16″-20	1.620″	1.280″	5.07″	1.250″
ZT674-W-TF	7/16″-20	1.750″	1.531″	5.07″	1.500″
ZT674-WPH-TF	7/16″-20	2.125″	1.531″	5.07″	1.500″
ZT674-WWPH-TF	7/16″-20	2.500″	2.010″	5.07″	2.000″
ZT691-S-TF	3/8″-24	1.62″	1.28″	5″	1.250″
ZT691-SPI-TF	3/8″-24	1.62″	1.28″	5″	1.250″
ZT691-W-TF	3/8″-24	1.75″	1.531″	5″	1.5″
ZT691-WPI-TF	3/8″-24	1.75″	1.531″	5″	1.5″
ZT692-S-TF	7/16″-20	1.62″	1.28″	5″	1.25″
ZT692-SPI-TF	7/16″-20	1.62″	1.28″	5″	1.25″
ZT692-W-TF	7/16″-20	1.75″	1.531″	5″	1.5″
ZT692-WPI-TF	7/16″-20	1.75″	1.531″	5″	1.5″

Documents

Heavy Duty Microstop Cages

Standard Microstop Cages

aircraft-tools — Thu, 12 Apr 2012 21:23:53 +0000

ZT330

Max. RPM = 3000
Shaft Travel = 9/32″
Adjustment = 5/16″
1/4″-28 shaft thread

ZT330-S cage shown with the “S” style footpiece.

ZT331

Max. RPM = 3000
Shaft Travel = 1/2″
Adjustment = 1″
3/8″-24 shaft thread

ZT331-SP cage shown with “SP” style footpiece.

ZT334

Max. RPM = 3000
Shaft Travel = 1/2″
Adjustment = 1″
7/16″-20 shaft thread

ZT334-W cage shown with “W” footpiece.

ZT339

For Precision Deburring or Spotfacing. Solves the problem of sheet cracking when dimpling titanium and other exotic materials. Accurately controls the depth of cut and radius with non-slip lock. 3/32″ shaft travel with 5/16″ total adjustment. .001″ incremental depth adjustment.

IT2196

An economic alternative to the ZT330. Available in “S” style foot only. Made in the USA.

All of the footpieces except “R” (which will only fit the ZT330) shown to the left will fit all three microstop cages shown above. Footpiece styles “SP” and “WP” are available with either a hardened, polished steel foot or a nylon screw-on protective footpiece to help eliminate surface scratching.

Microstop Part Number	Footpiece OD	Overall Length	Max. Cutter Dia.
ZT330-S	.87”	3.56”	5/8”
ZT330-W	1.00”	3.56”	3/4”
ZT330-X	.87”	3.56”	5/8”
ZT330-Y	.87”	3.56	5/8”
ZT330-Z	.87”	3.56”	5/8”
ZT330-R	.45”	3.56”	5/16”
ZT330-SP	1.25”	3.56”	5/8”
ZT330-WP	1.25”	3.56”	3/4”
ZT331-S	1.11”	5.31”	7/8”
ZT331-W	1.62”	5.31”	1-3/8”
ZT331-X	1.11”	5.31”	7/8”
ZT331-Y	1.11”	5.31”	7/8”
ZT331-Z	1.11”	5.31”	7/8”
ZT331-SP	1.13”	5.31”	7/8”
ZT331-WP	1.87”	5.31”	1-3/8”
ZT334-S	1.11”	5.31”	7/8”
ZT334-W	1.75”	5.31”	1-1/2”
ZT334-X	1.11”	5.31”	7/8”
ZT334-Z	1.11”	5.31”	7/8”
ZT334-SP	1.37”	5.31”	7/8”
ZT334-WP	2.00”	5.31”	1-1/2”

Documents

Standard Countersink Cages

Extended Footpiece Countersink Cages

aircraft-tools — Thu, 12 Apr 2012 20:20:02 +0000

Rated for 3000 rpm continuous usage.
2.750″ long extended skirt
9/32″ shaft travel
5/16″ total adjustment
.001″ incremental depth adjustment

Cage part Number	Shaft Thread	Max. Cutter Dia.	Footpiece I.D.	Footpiece O.D.
ZT284-A	10-32	.250”	.275”	.375”
ZT284-B	1/4”-28	.300”	.325”	.425”
ZT284-C	1/4”-28	.375”	.400”	.500”
ZT284-D	1/4”-28	.562”	.656”	.750”

Documents

Extended Footpiece Countersink Cages

Solid Carbide & PCD Countersink Cutters

aircraft-tools — Wed, 11 Apr 2012 21:07:35 +0000

Solid Carbide Countersink Cutters

IT3660 Two-Flute Integral-Piloted Countersink

These tools come with standard 1/4-28 threaded-shanks that fit conventional microstop countersink cages.

IT3670 Three-Flute Integral-Piloted Countersinks

These tools come with standard 1/4-28 threaded-shanks that fit conventional microstop countersink cages.

PCD Countersink Cutter

IT3650 PCD Integral-Piloted Countersinks

Polycrystalline Diamond integral-piloted countersinks are manufactured to the highest standards for use in highly abrasive composite materials and non-ferrous metals that are used in aerospace applications.

Documents

Solid Carbide & PCD Countersink Cutters

Carbide-Tipped Countersink Cutters

aircraft-tools — Wed, 11 Apr 2012 20:56:04 +0000

Carbide-Tipped, 2 & 3 Flute Countersink Cutters with Integral Pilots

Part Number	C’sink Angle	Body Diameter	Pilot Size
IT62C-21	100º	7/16″	.1590″
IT62C-30	100º	7/16″	.1285″
IT62C-40	100º	7/16″	.0980″
IT62C-3/16″	100º	7/16″	.1875″
IT62C-1/4″	100º	7/16″	.2500″
IT62AC-21	120º	7/16″	.1590″
IT62AC-30	120º	7/16″	.1285″
IT62AC-40	120º	7/16″	.0980″
IT62AC-3/16″	120º	7/16″	.1875″
IT62AC-1/4″	120º	7/16″	.2500″
IT62C-1-21	100º	3/8″	.1590″
IT62C-1-30	100º	3/8″”	.1285″
IT62C-1-40	100º	3/8″	.0980″
IT62C-1-3/16″	100º	3/8″	.1875″
IT62C–1-1/4″	100º	3/8″	.2500″
IT62AC-1-21	120º	3/8″	..1590″
IT62AC-1-30	120º	3/8″	.1285″
IT62AC-1-40″	120º	3/8″	.0980″
IT62AC-1-3/16″	120º	3/8″	.1875″
IT62AC-1-1/4″	120º	3/8″	.2500″
IT63C-21	100°	7/16″	.1590″
IT63C-30	100°	7/16″	.1285″
IT63C-40	100°	7/16″	.0980″
IT63C-3/16″	100°	7/16″	.1875″
IT63C-1/4″	100°	7/16″	.2500″
IT63AC-21	120°	7/16″	.1590″
IT63AC-30	120°	7/16″	.1285″
IT63AC-40	120°	7/16″	.0980″
IT63AC-3/16″	120°	7/16″	.1875″
IT63AC-1/4″	120°	7/16″	.2500″
IT63C-1-21	100°	3/8″	.1590″
IT63C-1-30	100°	3/8″	.1250″
IT63C-1-40	100°	3/8″	.0980″
IT63C-1-3/16″	100°	3/8″	.1875″
IT63C-1-1/4″	100°	3/8″	.2500″

Documents

Carbide-Tipped Countersink Cutters

HSS Countersink Cutters

aircraft-tools — Wed, 11 Apr 2012 20:37:57 +0000

Standard HSS, 3-Flute 1/4”-28 Threaded Shank

Part Number	C’sink Angle	Body Diameter	Pilot Size
IT62-8	100º	7/16″	.1990″
IT62-10	100º	7/16″	.1935″
IT62-11	100º	7/16″	.1910″
IT62-12	100º	7/16″	.1890″
IT62-13	100º	7/16″	.1850″
IT62-16	100º	7/16″	.1770″
IT62-21	100º	7/16″	.1590″
IT62-30	100º	7/16″	.1285″
IT62-27	100º	7/16″	.1440″
IT62-40	100º	7/16″	.0980″
IT62-3/16″	100º	7/16″	.1875″
IT62-1/4″	100º	7/16″	.2500″
IT62-3/8″	100º	7/16″	.3750″
IT62-1-21	100º	3/8″	.1590″
IT62-1-30	100º	3/8″	.1285″
IT62-1-40	100º	3/8″	.0980″
IT62-1-3/16″	100º	3/8″	.1875″
IT62-1-1/4″	100º	3/8″	.2500″
IT62A-21	120º	7/16″	.1590″
IT62A-30	120º	7/16″	.1285″
IT62A-40	120º	7/16″	.0980″
IT62A-3/16″	120º	7/16″	.1875
IT62A-1/4″	120º	7/16″	.2500″
IT62A-1-21	120º	3/8″	.1590″
IT62A-1-30	120º	3/8″	.1285″
IT62A-1-40	120º	3/8″	.0980″
IT62A-1-3/16″	120º	3/8″	.1875″
IT62A-1-1/4″	120º	3/8″	.2500″

Documents

HSS Countersink Cutters

Taper-Lok Cutters

aircraft-tools — Tue, 10 Apr 2012 20:56:08 +0000


	TLD2040AR The TLD2040AR flush head drill-reamer is intended for use in aluminum and other soft metals. A pilot hole is required when using this tool which produces a standard finish Taper-lok hole. Tool has a 20º helix angle and is manufactured from M-7 high-speed tool steel.
	TLD2040BR The TLD2040BR protruding-head drill-reamer is intended for use in aluminum and other soft metals. A pilot hole is required when using this tool which produces a standard finish Taper-lok hole. Tool has a 20º helix angle and is manufactured from M-7 high-speed tool steel.
	TLD2030AR The TLD2030AR flush-head drill-reamer is intended for use in titanium and harder metals. A pilot hole is required when using this tool which produces a standard finish taper-lok hole. This cutter has oil-holes and is manufactured from cobalt tool steel.
	TLD2030BR The TLD2030BR protruding-head drill-reamer is intended for use in titanium and harder metals. A pilot hole is required when using this tool which produces a standard finish taper-lok hole. This cutter has oil-holes and is manufactured from cobalt tool steel.

Documents

Taper-Lok Cutters

Rivet Shaver Cutters

aircraft-tools — Mon, 09 Apr 2012 20:48:34 +0000

Solid Carbide for use in any shaver that has a 1/4”-28 internal thread.

IT791 Series

Unique center cutting design with 2 flute center cutting design with 14 actual flutes. Self-centering feature eliminates any cutter chatter & increases operator control.

Part Number	Body Dia.
IT791-3/8”	3/8”
IT791-1/2”	1/2”

IT50 Series

Part Number	Body Dia.
IT50-1	1/4”
IT50-2	5/16”
IT50-3	3/8”
IT50-4	7/16”
IT50-5	1/2”
IT50-6	9/16”
IT50-6	5/8”
IT50-7	3/4”
IT50-8	7/8”
IT50-9	1”

Documents

Rivet Shaver Cutters

Drill Stops

aircraft-tools — Wed, 04 Apr 2012 20:50:01 +0000

KDS Drill Stops

Part Number	No Mar Drill Stops	Equivalent to:	Color	Drill Size
KDS 50	ITNMDS 50	black	black	#50
KDS 40	ITNMDS40	zinc	zinc	#40
KDS 30	ITNMDS 30	copper	copper	#30
KDS 28	ITNMDS 28	zinc	zinc	#28
KDS 21	ITNMDS 21	black	black	#21
KDS 20	ITNMDS 20	zinc	zinc	#20
KDS 12	ITNMDS 12	brass	brass	#12
KDS 10	ITNMDS 10	brass	brass	#10
KDS 1/4	ITNMDS 1/4	copper	copper	1/4”
KDS 5/16	ITNMDS 5/16	copper	copper	5/16”

Documents

Drill Stops

Threaded Shank Drills

aircraft-tools — Tue, 03 Apr 2012 20:18:35 +0000

Threaded Shank Drills

High Speed Steel

Drills are manufactured to NAS 965 Type B construction with 135 deg. split-points. 1/4-28 UNF Class 2A thread surface treated—steam oxide.

Cobalt

Drills are manufactured to NAS 965 Type D construction with 135 deg. P-8 split points. 1/4-28 UNF Class 2A thread surface treated— steam oxide.

Stub Series

HSS Part Number	Cobalt Part Number	Size	Overall Length	Flute Length
111-0980	152-0980	#40	1/2”	5/16”
111-1285	152-1285	#30	9/16”	5/16”
111-1440	152-1440	#27	9/16”	5/16”
111-1590	152-1590	#21	9/16”	5/16”
111-1610	152-1610	#20	9/16”	5/16”
111-1770	152-1770	#16	9/16”	5/16”
111-1850	152-1850	#13	9/16”	5/16”
111-1910	152-1910	#11	9/16”	5/16”
111-1935	152-1935	#10	9/16”	5/16”
111-1990	152-1990	#8	5/8”	5/16”
111-2460	152-2460	“D”	5/8”	5/16”
111-1250	152-1250	1/8”	1/2”	5/16”
111-2500	152-2500	1/4”	5/8”	5/16”

Long Series

HSS Part Number	Cobalt Part Number	Size	Overall Length	Flute Length
311-0980	352-0980	#40	2-1/8”	7/8”
311-1285	352-1285	#30	2-1/8”	1-1/8”
311-1440	352-1440	#27	2-1/8”	1-1/8”
311-1590	352-1590	#21	2-1/8”	1-1/8”
311-1610	352-1610	#20	2-1/8”	1-1/8”
311-1770	352-1770	#16	2-1/8”	1-1/8”
311-1850	352-1850	#13	2-1/8”	1-1/8”
311-1910	352-1910	#11	2-1/8”	1-1/8”
311-1935	352-1935	#10	2-1/8”	1-1/8”
311-1990	352-1990	#8	2-1/8”	1-1/8”
311-2460	352-2460	“D”	2-1/8”	1-1/8”
311-2570	352-2570	“F”	2-1/8”	1-1/8”
311-1250	352-1250	1/8”	2-1/8”	7/8”
311-1562	352-1562	5/32”	2-1/8”	1-1/8”
311-1875	352-1875	3/16”	2-1/8”	1-1/8”
311-2188	352-2188	7/32”	2-1/8”	1-1/8”
311-2500	352-2500	1/4”	2-1/8”	1-1/8”

Short Series

HSS Part Number	Cobalt Part Number	Size	Overall Length	Flute Length
211-0980	252-0980	#40	1”	9/16”
211-1285	252-1285	#30	1-1/4”	9/16”
211-1440	252-1440	#27	1-1/4”	9/16”
211-1590	252-1590	#21	1-1/4”	9/16”
211-1610	252-1610	#20	1-1/4”	9/16”
211-1770	252-1770	#16	1-1/4”	9/16”
211-1850	252-1850	#13	1-1/4”	9/16”
211-1910	252-1910	#11	1-1/4”	9/16”
211-1935	252-1935	#10	1-1/4”	9/16”
211-1990	252-1990	#8	1-1/4”	9/16”
211-2460	252-2460	“D”	1-1/4”	9/16”
211-2570	252-2570	“F”	1-1/4”	9/16”
211-1250	252-1250	1/8”	1”	9/16”
211-1562	252-1562	5/32”	1-1/4”	9/16”
211-1875	252-1875	3/16”	1-1/4”	9/16”
211-2188	252-2188	7/32”	1-1/4”	9/16”
211-2500	252-2500	1/4”	1-1/4”	9/16”

Documents

Threaded Shank Drills

Carbide Cuttings Tools

aircraft-tools — Thu, 29 Mar 2012 21:01:40 +0000

Solid Carbide Threaded Shank Drills

Drills are sub-micro grain solid carbide with 135 degree modified P-3 split points. 1/4-28 UNF Class 2A thread surface treated —steam oxide.

“Long” Part Number	“Short” Part Number	“Stub” Part Number	Size
340-0980	240-0980	140-0980	#40
340-1285	240-1285	140-1285	#30
340-1590	240-1590	140-1590	#21
340-1610	240-1610	140-1610	#20
340-1850	240-1850	140-1850	#13
340-1935	240-1935	140-1935	#10
340-2500	240-2500	140-2500	1/4”

Solid Carbide Tools

IT3200 Series Tapered “Dreamer”

Also known as a “one-shot” drill-reamer, this tool can be used for hand drilling through a bushing, or with power or positive feed drillmotors. These drills are excellent for drilling graphite composites. Also available in threaded shank.

IT3000 Series “Dagger Drill”

Used with power feed/ positive feed drillmotors, this drill is designed to produce delamination free holes in graphite material or graphite/aluminum provided the material stackup doesn’t exceed 1/4”. Also available in threaded shank.

IT4045 Series 6″ Aircraft Extension Drills

Drills are manufactured to NAS 965 construction with 135° modified split points for drilling composite and non-ferrous metals. Jobber length and 12” extension lengths available.

IT2009 Kevlar-Point Twist Drills

This drill’s geometry is designed to produce fuzzfree holes in Aramid fiber materials. Also available in jobber and aircraft extension lengths.

IT3580 & IT2300 Drivematic & Spacematic Drills

Used in Drivematic/GEMCOR machines or Spacematic or Q-matic power feed drillmotors.

IT3300 Parabolic Fluted Drills

Recommended for “deep-hole” drilling in non-ferrous materials; aluminum, fiberglass, graphite, plastics, etc.

Solid Carbide Router Bits

	IT2900 & IT2906 Series For Laminated Composites Two flute and six flute Kevlar routers are designed for use in routing laminated composites of Kevlar. Aramid Fibers and Fiberglass. Opposing cutting flutes eliminate delamination and offer a high production rate.
	IT2600 Series Carbide Fluted Routers This style of router bit works well in a down-cut configuration. Also good in CNC routing of aluminum.
	IT2700 Series Diamond Cut Routers Long accepted as a standard for routing fiberglass materials, this tool is also being used for routing carbon materials.
	IT1435A Series Honeycomb Routers Long accepted as a standard for routing fiberglass materials, this tool is also being used for routing carbon materials.

Documents

Carbide Cutting Tools

HSS Briles Rivet® Countersink Cutters

aircraft-tools — Mon, 26 Mar 2012 20:24:25 +0000

1/4”-28 threaded shank
To prepare holes for Mil. Std. 14218; Briles Std. BFRZ; Boeing Std. BACR15FV; Voi-Shan Std. VRFZ rivets.
Use with longer travel microstop cages—look in the countersinking tool section of this catalog.
Briles Rivet® is a registered trademark of Allfast Fastening Systems, Inc.

Part Number	“A” Dia.	“B” Dia.	“C” Dia.	“J” Dim.	“H” Dim.
IT62BR-1/8”	.1625”	.126”	3/8”	.200”	.952”
IT62BR-5/32”	.2105”	.159”	3/8”	.220”	.955”
IT62BR-3/16”	.2585”	.191”	3/8”	.250”	.958”
IT62BR-7/32”	.3125”	.226”	3/8”	.280”	.962”
IT62BR-1/4”	.3585”	.255”	1/2”	.280”	.966”

Documents

BACR15FV / Briles Cutterstd/tr

Aircraft Extension Drills

aircraft-tools — Thu, 22 Mar 2012 20:23:08 +0000

NAS 907 Type “B” & Type “J” 135º Split Point – HSS &
Cobalt—6” & 12” Extensions

HSS Part Number	Cobalt Part Number	Size	Flute Length	OAL.
IT4010-0980	IT4040-0980	#40	1-3/8”	6”
IT4030-0980	IT4070-0980	#40	1-3/8	12”
IT4010-1285	IT4040-1285	#30	1-5/8	6”
IT4030-1285	IT4070-1285	#30	1-5/8	12”
IT4010-1440	IT4040-1440	#27	1-7/8”	6”
IT4030-1440	IT4070-1440	#27	1-7/8”	12”
IT4010-1590	IT4040-1590	#21	2-1/8”	6”
IT4030-1590	IT4070-1590	#21	2-1/8”	12”
IT4010-1610	IT4040-1610	#20	2-1/8”	6”
IT4030-1610	IT4070-1610	#20	2-1/8”	12”
IT4010-1770	IT4040-1770	#16	2-3/16”	6”
IT4030-1770	IT4070-1770	#16	2-3/16”	12”
IT4010-1850	IT4040-1850	#13	2-5/16”	6”
IT4030-1850	IT4070-1850	#13	2-5/16”	12”
IT4010-1910	IT4040-1910	#11	2-5/16”	6”
IT4030-1910	IT4070-1910	#11	2-5/16”	12”
IT4010-1935	IT4040-1935	#10	2-7/16”	6”
IT4030-1935	IT4070-1935	#10	2-7/16”	12”
IT4010-1990	IT4040-1990	#8	2-7/16”	6”
IT4030-1990	IT4070-1990	#8	2-7/16”	12”
IT4010-2460	IT4040-2460	“D”	2-3/4”	6”
IT4030-2460	IT4070-2460	“D”	2-3/4”	12”
IT4010-2570	IT4040-2570	“F”	2-7/8”	6”
IT4030-2570	IT4070-2570	“F”	2-7/8”	12”
IT4010-1250	IT4040-1250	1/8”	1-5/8”	6”
IT4030-1250	IT4070-1250	1/8”	1-5/8”	12”
IT4010-1562	IT4040-1562	5/32”	2”	6”
IT4030-1562	IT4070-1562	5/32”	2”	12”
IT4010-1875	IT4040-1875	3/16”	2-5/16”	6”
IT4030-1875	IT4070-1875	3/16”	2-5/16”	12”
IT4010-2188	IT4040-2188	7/32”	2-1/2”	6”
IT4030-2188	IT4070-2188	7/32”	2-1/2”	12”
IT4010-2500	IT4040-2500	1/4”	2-3/4”	6”
IT4030-2500	IT4070-2500	1/4”	2-3/4”	12”

Documents

Aircraft Extension Drills

Aircraft Tools: Innovative Tooling Services

Pulse Tools

Omega Torque-Controlled Shut-Off Pulse Tools

ULT-70

Documents

Nutrunners

Documents

Allfast Nose Assemblies

Olympic Style Noses

“Max” Style Noses

Ground Stud Noses

Documents

Allfast Adapters

RVA365

RV704E

RVA704H-701L

RVA704

RVA84

Documents

Allfast Rivet Guns

Allfast RV14GD

RV14GD

Allfast RV30GD

RV30GD

Allfast RV15G

RV15G

Allfast RV50GB

RV50GB

Allfast RV51GA

RV51GA

Documents

Vacuum Microstop Cages

The ZT680-ITVF Microstop w/ Vacuum Footpiece

Documents

Taper-Lok Microstop Cages

TLA4900-12

TLA4900-24

TLA4900-38

Knockout Tools

TLA4150

Gages

TLG5120 & TLG5125

TLG5160

TLG5130-1; TLG5130-2; TLG5130-3

Documents

Heavy Duty Microstop Cages

ZT680 Series

Features:

Footpiece Options for the ZT680 Microstop Cage

Large Cutter Capacity Precision Cages

Documents

Standard Microstop Cages

ZT330

ZT331

ZT334

ZT339

IT2196

Documents

Extended Footpiece Countersink Cages

Documents

Solid Carbide & PCD Countersink Cutters

Solid Carbide Countersink Cutters

IT3660 Two-Flute Integral-Piloted Countersink

IT3670 Three-Flute Integral-Piloted Countersinks

PCD Countersink Cutter

IT3650 PCD Integral-Piloted Countersinks

Documents

Carbide-Tipped Countersink Cutters

Carbide-Tipped, 2 & 3 Flute Countersink Cutters with Integral Pilots

Documents

HSS Countersink Cutters

Standard HSS, 3-Flute 1/4”-28 Threaded Shank

Documents

Taper-Lok Cutters

TLD2040AR

TLD2040BR

TLD2030AR

TLD2030BR

Documents

Rivet Shaver Cutters

NAS 907 Type “B” & Type “J” 135º Split Point – HSS &
Cobalt—6” & 12” Extensions