The ITMDA Guided Manual Precision Drillmotor has many benefits that OEM’s and MRO airframe users can take advantage of.

First is it’s lightweight at only 4 lbs. It also has adjustable forward and back positive stops to increase or decrease drill stroke, adjustable spring resistance to the operator,and spring back to the stand-by position.

With adjustable length guide rods, it can be adjusted for different drill lengths. The bushing in the transfer housing up front uses a standard slip-fixed bushing, that can be modified on how far it protrudes forward, and also the OD of the exposed bushing to fit the ID of your part or tooling fixture. The motor yoke can be rotated and locked radially approx. 270° around the reduction gear housing on the drillmotor to get around obstructions.

The drillmotor shown is our UT8892-24 series .46 hp palm drill, capable of drilling up to 1/4″ aluminum hole diameter @ 2400 rpm with 48 in-lbs. of stall torque @90 psi. Drillmotor speeds are 500/1000/2400/3300/4500/6000.